One-Touch Fume Extraction! KNOKOO FES060 — The Hassle-Free Purification Partner for Small Bench-Top Soldering

Fume issues in compact workstations—bench-top soldering, soldering iron operations, and electronics repair—are often “small but troublesome.”
The fume volume is not high but lingers constantly; work areas are tight, leaving no room for bulky equipment; and complicated controls slow down workflow.
Traditional extractors are either difficult to install, complicated to operate, or prone to leakage, making them unsuitable for small workbenches.

The KNOKOO FES060 Mini Fume Extractor is designed specifically for these scenarios.
With its one-button operation, precise source capture, and quiet, leak-proof purification, it enables small soldering and repair stations to achieve “instant clean air on startup”—simple, effective, and worry-free.

1. One-Touch Operation + Compact Design — Zero Learning Curve for Small Workstations

Understanding the “space-saving and time-saving” needs of small work areas, the FES060 maximizes convenience:

One-button start, intuitive for anyone

No complex buttons or parameter settings—just press the switch to start purification.
Whether used by soldering technicians or repair engineers, the operation requires no training. Start and stop instantly without interrupting workflow.

Compact footprint for tight spaces

The slim, space-efficient body is engineered for small bench-top setups. It fits easily into corners or edges of soldering stations or repair benches without occupying operational space—keeping work areas clean, organized, and efficient.

No installation required — plug and play

No external ducting, no professional setup.
Simply unpack the unit, position the fume tube, and begin working. Even temporary or mobile workstations can achieve instant fume purification without installation hassle.

2. 360° Precision Fume Capture — Locking Onto the Source Without Leakage

Fumes in small stations are concentrated in a very localized area. Effective capture requires close proximity and zero escape.
The FES060’s extraction design addresses this need directly:

Flexible segmented arm — 360° positioning

The flame-retardant segmented tube provides excellent sealing and stability. It rotates freely in all directions and can be positioned precisely above the soldering tip or bench-top welding point—capturing fumes at the source before they reach the breathing zone.

Two hood options for different tasks

• Round hood: ideal for point-source fumes from soldering irons or small laser marking

• Square hood: ideal for wider-area fumes from bench-top welding
  Choose the configuration that best fits the application and instantly improve capture efficiency.

Compact routing that doesn’t interfere with work

The fume tube and unit layout remain unobtrusive and do not tangle with tools.
During soldering or repairs, tool movement remains smooth and unrestricted.

3. Dual-Layer Deep Filtration — 99.97% Fume & Odor Removal for Respiratory Safety

For solder fumes, lead fume, and flux odors generated in bench-top work, the FES060 uses a dual-stage targeted filtration system:

Two-stage filtration for complete fume and odor removal

• Stage 1: Pre-filter blocks solder debris, tin beads, and large particles, protecting the main filter.

• Stage 2: Premium imported coconut-shell activated carbon absorbs fine particulate fumes, lead fume, and VOC odors from solder and flux.

Purification efficiency reaches 99.97%, effectively eliminating both smoke and odor—protecting operator respiratory health and maintaining a clean workspace.

Sealed design — prevents leakage and secondary pollution

A dedicated sealing strip between the lid and housing ensures airtight performance.
No gaps, no bypass leakage—eliminating the common issue of “half purified, half escaping” fumes.

4. Ultra-Quiet Operation ≤52 dB — Comfortable and Non-Disruptive for Small Rooms

Small workstations are often enclosed, making noise levels more noticeable.
The FES060 keeps noise low and comfort high:

Low-noise performance that doesn’t disrupt work

Operating noise ≤52 dB (similar to normal conversation), ensuring it won’t disturb concentration during soldering or precision repair work, nor create discomfort during long working hours.

Stable operation without vibration

The sturdy structure eliminates unwanted shaking and extra noise.
Quiet operation + clean air = a healthier and more comfortable workspace.

5. Versatile for Multiple Small-Scale Applications — Full Coverage Fume Control

Though compact, the FES060 is engineered for wide application coverage:

Bench-top soldering

Continuous fumes from manual soldering are captured directly at the source via the segmented fume arm.
Instant purification without slowing down work efficiency.

Soldering iron operations

Captures fumes containing lead particles and flux odors during electronics soldering and PCB repair, protecting the technician and preventing contamination of sensitive electronic components.

Repair workstations / small laser marking

Suitable for intermittent solder fumes and light smoke from small laser marking units—keeping repair benches clean and improving overall working comfort.

6. Why Choose FES060 — Because “Effortless” Matters Most in Small Workstations

For bench-top soldering, soldering iron operations, or small laser marking, the KNOKOO FES060 is not an oversized compromise—
it is the precise, optimal solution.

It solves all small-workstation pain points:

✔ One-button operation → eliminates complex settings
✔ Compact body → solves space limitations
✔ 360° source capture + sealed filtration → eliminates fume leakage
✔ Quiet operation → eliminates noise disturbance

No complicated setup, no wasted space, no fume leakage.
The FES060 makes fume extraction simple, protects operator health, and improves efficiency—
becoming the truly hassle-free purification partner for small bench-top soldering and repair stations.